Skip to main content

View a Configured IPsec Connector's Details

Abstract

Access the detail view for a configured CloudConnexa IPsec Network Connector — view connection status, region, public IP address, and tunnel configuration, and edit or suspend the connector.

Overview

After you configure an IPsec Connector, open its detail view to check its Connection Status, CloudConnexa public IP address, tunneling protocol, and tunnel configuration.

From the detail view, you can also edit the Connector or its tunnel configuration, suspend or resume the Connector, or delete it.

View the Connector details

To view a configured IPsec Connector:

  1. step

  2. Navigate to Networks → Connectors.

  3. Find the configured IPsec Connector you want to view.

    Tip

    For information about finding and managing Connectors, refer to List, Search, Edit, and Delete Network Connectors.

  4. Select the hyperlinked Name of the Connector.

    • The Connector detail view displays.

Note

A Connector's name becomes a link after its configuration is complete. If the name isn't linked, complete the Connector configuration before attempting to open its detail view.

Tip

You can also access a configured Connector from its Network. Navigate to Networks → Networks, select the Network, then select the Connector from the Connectors tab.

Review the Connector details

The Connector detail view displays:

  • Connection Status: The current connection state of the Connector.

  • Region: The CloudConnexa Region assigned to the Connector.

  • CloudConnexa Public IP Address: The CloudConnexa data center IP address used by the IPsec tunnel.

  • Tunneling Protocol: The protocol configured for the Connector.

The Tunnel Configuration section displays the IPsec tunnel configuration.

Manage the Connector

From the connector detail view, you can:

  • Select Edit Connector to update general Connector settings, such as its name, description, or Region.

  • Select Edit Configuration to change the IPsec tunnel configuration. Refer to Edit an IPsec Connector's Configuration.

  • Select Suspend or Resume to change the Connector's connection state.

  • Delete the Connector.

In this section:
See also: