Add a Route to a Network
You can add a Route to a Network from the IP Services tab shown in the detailed Network view or from the IP Services list view, as shown here.
Routes define public and private IP address subnets that will be routed to this Network. Routes are not required to be added because IP Services create implicit routes for the network. If there is a need to reduce the number of routes CloudConnexa pushes to clients' device routing table, routes can be explicitly configured. See Enable configuring routes for networks.
Note
The Routes section will be shown only if Route Configuration is enabled. See Enable configuring routes for networks.
You can add a Route to an existing Network from the IP Services tab shown in the detailed view as shown in View, make changes, and delete a Network, or you can add it from the IP Services list as shown below:
Navigate to Networks > IP Services.
Click Add Route.
Select a Network from the drop-down list.
Provide the IP Subnet for the Route.
Add an optional Description.
Click Add Route.
The newly added Route will be listed.