Set the IP Subnet range from which to assign Tunnel IP addresses
Tunnel IP Addresses for all User Devices and Connectors are assigned from the WPC Subnet range.
Tunnel IP Addresses for all User Devices and Connectors are assigned from the WPC Subnet range.
It is unlikely that the IP address range set as the default needs to be changed because it is from an IP address range reserved for information carriers to use.
This IP address range can be changed if it conflicts with IP addresses already used within your private networks. More IP address subnets can be added to the default range too. Ensure that your WPC subnet IP addresses don’t overlap with the IP address ranges already in use with the private networks you plan to connect to CloudConnexa.
To set or add to the WPC Subnet, follow the steps below:
Navigate to Settings > WPC.
Click Edit, which is located in the top right corner.
Edit the IPv4 and IPv6 ranges in the WPC Subnet section or click + Add new to add new subnets to the WPC Subnet range.
Click Update.
Check that the details shown in the confirmation dialog box are correct, and click Confirm.