---
title: Set the IP Subnet Range from which to Assign Tunnel IP Addresses
canonical: https://openvpn.net/cloud-docs/owner/settings/settings---wpc/set-the-ip-subnet-range-from-which-to-assign-tunnel-ip-addresses/
product: CloudConnexa Docs
description: Tunnel IP Addresses for all User Devices and Connectors are assigned from the WPC Subnet range.
keywords: WPC Subnet
---

# Set the IP Subnet Range from which to Assign Tunnel IP Addresses

Tunnel IP Addresses for all User Devices and Connectors are assigned from the WPC Subnet range.

By default, CloudConnexa uses IP address ranges reserved for private use, so you typically don't need to change these values.

You may need to update the WPC subnet range if it conflicts with IP address ranges already used in your private networks. You can also add additional subnets if needed. Ensure that your WPC subnet ranges don’t overlap with the IP address ranges already in use with the private networks you plan to connect to CloudConnexa.

## Edit the WPC Subnet range

To set or add to the WPC Subnet, follow the steps below:

1. Sign in to your WPC's Administration Portal at your **Cloud ID** address (for example, `yourcompany.openvpn.com`).
2. Navigate to **Settings → WPC**.
3. Click **Edit**.
4. In the **WPC Subnet** section:
   - Edit the IPv4 subnet range.
   - If **IPv4 and IPv6** is enabled, you can also edit the IPv6 subnet range.
   - Click **+ Add new** to add additional subnet ranges.
5. Click **Update**.
6. Check that the details shown in the confirmation dialog box are correct, and click **Confirm**.

## Tutorial showing how to set or add WPC Subnets

---

Prev: [IP Allocation Versions](https://openvpn.net/cloud-docs/owner/settings/settings---wpc/set-ip-allocation-versions.md)
Next: [Domain Routing Subnet](https://openvpn.net/cloud-docs/owner/settings/settings---wpc/set-the-ip-subnet-range-from-which-to-assign-domain-routing-ip-addresses.md)
Index: https://openvpn.net/cloud-docs/llms.txt