[OpenVPN home] [Date Prev] [Date Index] [Date Next]
[OpenVPN mailing lists] [Thread Prev] [Thread Index] [Thread Next]
Google
 
Web openvpn.net

Re: [Openvpn-users] /etc/init.d/openvpn does not work, manual is OK


  • Subject: Re: [Openvpn-users] /etc/init.d/openvpn does not work, manual is OK
  • From: "Edson" <4lists@xxxxxxxxx>
  • Date: Thu, 20 Sep 2007 14:31:46 -0300

Most problably this a problem concerned to the user used on the start process.

 

If You’re loged in as root and it start ok, try to make a ‘su’ to the user that openvpn runs and see what happens.

Edson.


From: openvpn-users-bounces@xxxxxxxxxxxxxxxxxxxxx [mailto:openvpn-users-bounces@xxxxxxxxxxxxxxxxxxxxx] On Behalf Of David Balazic
Sent: quinta-feira, 20 de setembro de 2007 14:13
To: debian-user@xxxxxxxxxxxxxxxx; openvpn-users@xxxxxxxxxxxxxxxxxxxxx
Subject: [Openvpn-users] /etc/init.d/openvpn does not work, manual is OK

 

Hi!

I've been using an OpenVPN client setup for months with success and now I decided to start it automatically during startup.

I copied the config file to /etc/openvpn/tun1.conf and the used key file also :  /etc/openvpn/key

If I now start it with " /etc/init.d/openvpn start", it works fine.

But if I reboot, it connects to the VPN server, but does not set the routes (I have "route-gateway 10.4.0.1" and
"redirect-gateway def1" in the config file).

 

The last lines after boot are :
NET: Registered protocol familiy 10
lo: Disabled Privacy Extensions
IPv6 over IPv4 tunneling driver
eth1: no IPv6 routers present