Terry Inzauro wrote:
Clients are Windows, I can't ping the VPN end-point, I have spent
hours on this today. Not exactly the first openvpn server I have
installed, all others have been fine. The clients connect fine and get
there IP address, I just can't do anything with it. there is something
very basic I am missing here, this is the configs -:
Steven Coutts wrote:
I have create another VPN tunnel.
The client PC's can connect fine but I can't get any traffic over the
tunnel. I have triple-checked my firewall and even done 'shorewall
clear' still can;t even ping.
Anyone any ideas what I can check?
perhaps try double and triple checking the clients route
table/setup....... start by working the your problems in reverse.
ping local ip of the tunnel(the ip on the tun device), then ping the
remote endpoint of the point to point tunnel, then try pinging
through the tunnel to a host on the remote lan...... it helps to add
some logging statements to the IPtables config on the remote side to
help diagnose issues.
also try cecking to see if :
echo 1 > /proc/sys/net/ipv4/ip_forward is corrent...
ifconfig 172.16.4.1 172.16.4.2
ifconfig-pool 172.16.4.4 172.16.5.254
push "route 172.16.4.1 255.255.255.255"
push "route 10.130.12.0 255.255.255.0"
push "route 10.130.24.0 255.255.252.0"
push "route 220.127.116.11 255.255.0.0"
push "dhcp-option DNS 10.130.24.2"
push "dhcp-option WINS 10.130.24.1"
push "dhcp-option NBT 8"
push "ping 10"
push "ping-restart 120"
route 172.16.4.0 255.255.254.0