[OpenVPN home] [Date Prev] [Date Index] [Date Next]
[OpenVPN mailing lists] [Thread Prev] [Thread Index] [Thread Next]
Google
 
Web openvpn.net

Re: [Openvpn-users] how to see a network


  • Subject: Re: [Openvpn-users] how to see a network
  • From: "Anton Krall" <akrall-lists@xxxxxxxxxxxxxxx>
  • Date: Tue, 31 Oct 2006 15:17:52 -0600

I also need to add this.. These linux boxes are not the internet gateway for
their respective LANs, they act as local servers only.

The computers that need to see each other have their own internet gateways. 

|-----Original Message-----
|From: Eero Volotinen [mailto:eero.volotinen@xxxxxxxxxxx] 
|Sent: Tuesday, October 31, 2006 2:49 PM
|To: Anton Krall
|Cc: openvpn-users@xxxxxxxxxxxxxxxxxxxxx
|Subject: Re: [Openvpn-users] how to see a network
|
|
|> Guys.
|>
|> I have a question regarding the configuration required to do this:
|>
|> I already have a tunnel using TUN between 2 linux hosts:
|> Server A has TUN IP 10.0.200.13 and is on a LAN 10.0.0.0/8 Server B 
|> has TUN IP 10.0.200.14 and is on a LAN 192.168.0.0/16
|>
|> Both servers can see each other perfectly... Now.. What I would like 
|> to do is this:
|>
|> I would like to allow a computer on LAN A with IP 10.0.0.2 to see 
|> another computer on LAN B IP 192.168.3.2
|>
|> Ive read about using TAP instead of TUN but I also read 
|since it send 
|> all traffic to both LANs, that it can cause problems.
|>
|> What can I do?
|
|Just set routes and it works ok. Note that is does not route 
|broadcast traffic, so you need to access machines by ip.addresses.
|
|Or setup dns to map names or wins proxy.
|
|--
|Eero
|
|
|


______________________
OpenVPN mailing lists
https://lists.sourceforge.net/lists/listinfo/openvpn-users