[OpenVPN home] [Date Prev] [Date Index] [Date Next]
[OpenVPN mailing lists] [Thread Prev] [Thread Index] [Thread Next]
Google
 
Web openvpn.net

Re: [Openvpn-users] how to see a network


  • Subject: Re: [Openvpn-users] how to see a network
  • From: "Eero Volotinen" <eero.volotinen@xxxxxxxxxxx>
  • Date: Tue, 31 Oct 2006 22:48:43 +0200 (EET)
  • Importance: Normal

> Guys.
>
> I have a question regarding the configuration required to do this:
>
> I already have a tunnel using TUN between 2 linux hosts:
> Server A has TUN IP 10.0.200.13 and is on a LAN 10.0.0.0/8
> Server B has TUN IP 10.0.200.14 and is on a LAN 192.168.0.0/16
>
> Both servers can see each other perfectly... Now.. What I would like to do
> is this:
>
> I would like to allow a computer on LAN A with IP 10.0.0.2 to see another
> computer on LAN B IP 192.168.3.2
>
> Ive read about using TAP instead of TUN but I also read since it send all
> traffic to both LANs, that it can cause problems.
>
> What can I do?

Just set routes and it works ok. Note that is does not route broadcast
traffic, so you need to access machines by ip.addresses.

Or setup dns to map names or wins proxy.

--
Eero

______________________
OpenVPN mailing lists
https://lists.sourceforge.net/lists/listinfo/openvpn-users