Re: [Openvpn-users] Windows client can't ping out.

[Craig Morrison <craig@xxxxxxxxxxxxxx>]

Daniel J. Wright wrote:
>   My problem is that while I can get a connection, I can't ping the remote
> side of the tunnel from either the client or the server.   I believe the
> problem is on my client end.
> 
>   If I open up the status windows for both the Win-TAP connection and the
> actual network connection I'm using to connect to the net, I see a
> couple things:
> 
> 1) On my Win-TAP connection, I see a lot of outbound packets, but the
> inbound packets is stuck at about 11 and never changes.
> 
> 2) If I try to ping the other end of the tunnel from my client, I see the
> outbound packet count on the Win-TAP device climbing, but the outbound
> packet count on my ISP connection never changes.
> 
>   From everything I read, this points to most likely being a firewall
> issue.  And given that the packets are never physically leaving my
> machine, I'm assuming a local firewall issue.   But the rub here is that
> I have the Windows firewall completely disabled in my control pannel.
> 
>   Can anybody suggest anything else that could be stopping the outbound
> Win-TAP packets from reaching my ISP device and going out?   Or,
> alternately, can anybody point out where I have failed in my deductive
> reasoning so far?

Have you checked your routing?

Also, what IP address are you pinging, the vpn IP for the other end or..?

-- 
Craig Morrison
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
http://pse.2cah.com
   Controlling pseudoephedrine purchases.

http://www.mtsprofessional.com/
   A Win32 email server that works for You.
______________________
OpenVPN mailing lists
https://lists.sourceforge.net/lists/listinfo/openvpn-users