Re: [Openvpn-users] Ping only works in one Direction...

[Jon Bendtsen <jon.bendtsen@xxxxxxxxxx>]

Den mandag 6.mar kl. 14:27 skrev Denis Oliana:

> Jon Bendtsen schrieb:
> > Den mandag 6.mar kl. 13:59 skrev Denis O.:
> >
> > > Hi.
> > >
> > > I have just set up a OpenVPN Server (W2k3-Server) and a Client  
> > > running
> > > xp.
> > > After struggling with the configs and routes I am now able to  
> > > ping from
> > > the client to the server. My big problem now is, that I am not  
> > > able to
> > > ping from the server to the client. Firewall is off.
> >
> > client or server firewall?
> > Check the routing table.
> > Use a packet sniffer to see where the packets are, meaning
> > do they leave the right net card interface? eth0? tun0?
> > Do they enter through the right one?
> >
> >
> >
> >
> > JonB
> Hello Jon,
>
>     I have tried turning off both firewalls. Right now they are turned
> on again (with the proper holes of course). The routing tables also
> seems to be OK (see below). Do you see anything wrong in the configs?

No i did not see anyhting in the configs, but i wonder a bit why  
there are
4 lines with 255.255.255.255 in the bottom of the routing table

Anyway, try using a network sniffer and follow the packets.

JonB

____________________________________________
Openvpn-users mailing list
Openvpn-users@xxxxxxxxxxxxxxxxxxxxx
https://lists.sourceforge.net/lists/listinfo/openvpn-users