Re: [Openvpn-users] vpn goes up, but no traffic. (?)

["David D." <david79345@xxxxxxxxx>]

Oh, here are the routing tables...

Thanks,
David

--------------

Client:

===========================================================================
Active Routes:
Network Destination        Netmask          Gateway   
   Interface  Metric
          0.0.0.0          0.0.0.0      192.168.1.1  
192.168.1.101       2
         10.0.0.0    255.255.255.0        10.0.0.40   
   10.0.0.40       3
        10.0.0.40  255.255.255.255        127.0.0.1   
   127.0.0.1       3
   10.255.255.255  255.255.255.255        10.0.0.40   
   10.0.0.40       3
        127.0.0.0        255.0.0.0        127.0.0.1   
   127.0.0.1       1
      192.168.1.0    255.255.255.0    192.168.1.101  
192.168.1.101       2
    192.168.1.101  255.255.255.255        127.0.0.1   
   127.0.0.1       2
    192.168.1.255  255.255.255.255    192.168.1.101  
192.168.1.101       2
        224.0.0.0        240.0.0.0        10.0.0.40   
   10.0.0.40       3
        224.0.0.0        240.0.0.0    192.168.1.101  
192.168.1.101       2
  255.255.255.255  255.255.255.255        10.0.0.40   
   10.0.0.40       1
  255.255.255.255  255.255.255.255    192.168.1.101  
192.168.1.101       1
Default Gateway:       192.168.1.1
===========================================================================


Server: 

Kernel IP routing table
Destination     Gateway         Genmask         Flags
Metric Ref    Use Iface
10.0.0.0        0.0.0.0         255.255.255.0   U    
0      0        0 eth1
10.0.0.0        0.0.0.0         255.255.255.0   U    
0      0        0 br0
10.0.0.0        0.0.0.0         255.255.255.0   U    
0      0        0 eth2
169.254.0.0     0.0.0.0         255.255.0.0     U    
0      0        0 eth2
192.168.0.0     0.0.0.0         255.255.0.0     U    
0      0        0 eth2
0.0.0.0         10.0.0.1        0.0.0.0         UG   
0      0        0 eth1



--- "David D." <david79345@xxxxxxxxx> wrote:

> Hello,
> 
> I am trying to use OpenVPN w/TLS, but while I can
> get
> the client to authenticate fine with the server, the
> tunnel does not pass any data.  (At least I can't
> seem
> to ping anybody...)
> 
> Here is my config:
> 
> Server: Linux
>  -- eth2 and tap0 are, supposedly, bridged using the
> script that came with OpenVPN, modified as needed. 
> Not sure how to test if this is working.
>  -- Using TCP, as VPN server is behind a NAT that
> will
> not forward UDP.  NAT is set to forward correct TCP
> data to VPN server.
> 
> Client:  WinXP
>  -- Also behind NAT, but this should not matter as
> the
> TCP stream is outgoing and should be handled by the
> NAT just like any other TCP stream, right?
> 
> Below are the config and route tables.
> 
> Thanks for any help,
> 
> David
> 
> -----------------------------
> -----------------------------
> 
> Server config is:
> 
> -------------------
> proto tcp-server
> port 12345
> 
> dh dh1024.pem
> ca ca.crt
> cert svrcert.crt
> key svrcert.key
> 
> dev tap0
> comp-lzo
> 
> server-bridge 10.0.0.1 255.255.255.0 10.0.0.40
> 10.0.0.49
> 
> route remote_host 255.255.255.255 net_gatway
> 
> keepalive 10 60
> --------------------------------
> 
> Client config is:
> --------------------------------
> 
> proto tcp-client
> port 12345
> 
> dev tap0801
> comp-lzo
> tls-client
> ns-cert-type server
> 
> remote host.name
> 
> ca ca.crt
> cert clicert.crt
> key clicert.key
> 
> keepalive 10 60 
> 
> 
> --------------------------------
> 
> __________________________________________________
> Do You Yahoo!?
> Tired of spam?  Yahoo! Mail has the best spam
> protection around 
> http://mail.yahoo.com 
> 
> 
>
-------------------------------------------------------
> The SF.Net email is sponsored by: Beat the
> post-holiday blues
> Get a FREE limited edition SourceForge.net t-shirt
> from ThinkGeek.
> It's fun and FREE -- well,
> almost....http://www.thinkgeek.com/sfshirt
> _______________________________________________
> Openvpn-users mailing list
> Openvpn-users@xxxxxxxxxxxxxxxxxxxxx
>
https://lists.sourceforge.net/lists/listinfo/openvpn-users
> 



		
__________________________________ 
Do you Yahoo!? 
Read only the mail you want - Yahoo! Mail SpamGuard. 
http://promotions.yahoo.com/new_mail 


-------------------------------------------------------
The SF.Net email is sponsored by: Beat the post-holiday blues
Get a FREE limited edition SourceForge.net t-shirt from ThinkGeek.
It's fun and FREE -- well, almost....http://www.thinkgeek.com/sfshirt
_______________________________________________
Openvpn-users mailing list
Openvpn-users@xxxxxxxxxxxxxxxxxxxxx
https://lists.sourceforge.net/lists/listinfo/openvpn-users