Re: [Openvpn-users] Linux server and Many Windows clients: No connection.

[Manuel Balderrábano <garibolo@xxxxxxxxxx>]

I'm confused:

eth0 is the LAN ethernet card.
eth1 is the external ethernet card, with it's public address.

br0 should have a fixed address that belongs to the internal LAN?
tap0 is the vpn interfaz, so it should have the address 10.3.0.3?

Regards.

El Miércoles, 5 de Mayo de 2004 11:45, Patrick Lesslie escribió:
> On Tue, May 04, 2004 at 06:10:48PM +0200, Manuel Balderrábano wrote:
> > 
> > Here are my config files:
> > 
> > **Windows**
> > 
> > remote <Public_Firewall_IP>
> > port 5000
> > dev tap
> > ip-win32 manual
> > ifconfig 10.3.0.3 255.255.255.0
> > secret c:\openVPN\secret.key
> > verb 5
> > ping 10
> > float
> > tun-mtu 1500
> > tun-mtu-extra 32
> > mssfix
> > disable-occ
> > route delay 1
> > route <Office_network_IP>  <Office_network_MASK> 10.3.0.4
> > 
> > **Linux**(eth0 is local network, eth1 is Internet)
> > 
> > dev tap0
> > up ./tap-up.sh
> > local <Office_network_IP>
> > secret /etc/openvpn/public.key
> > port 5000
> > ping 10
> > verb 5
> > #mssfix
> > tun-mtu 1500
> > tun-mtu-extra 32
> > 
> > **tap-up.sh**
> > 
> > #!/bin/bash
> > ifconfig br0 10.3.0.4 pointopoint 10.3.0.0 netmask 255.255.255.0 mtu 1500
>  
> You need to configure br0 to be on the ordinary office lan, like
> 192.168.0.0/24 or something like that.  10.3.0.0 is a good choice for
> the openvpn virtual addresses, but not for br0.
> 
> > **SuSEFirewall**
> > (added tap0 as internal network interface)
> > 
> > What am I doing wrong? The Windows and Linux boxes can't even see 
themselves!
> > 
> > Thanks in advance.
> 




____________________________________________
Openvpn-users mailing list
Openvpn-users@xxxxxxxxxxxxxxxxxxxxx
https://lists.sourceforge.net/lists/listinfo/openvpn-users