[Openvpn-users] Need help on bridging

[Bill Tabor <bill.tabor@xxxxxxxxxxxxxx>]

network 1  
             (10.1.5.1) 
      dsl --- linksys|---linux(openvpn 1 ethernet card) 10.1.50.2
                     |---W2k                            10.1.50.101
                     |---W2k                            10.1.50.102


network 2
             (192.168.1.1) 
      dsl --- linksys|---linux(openvpn 1 ethernet card) 192.168.1.50
                     |---linux                          192.168.1.51
                     |---W2k                            192.168.1.100

the tunnel address for network 1 is 10.4.0.1
                       network 2 is 10.4.0.2

routes network 1
 linux tunnel 1 -net 192.168.1.0 netmask 255.255.255.0 gw 10.4.0.2
 linksys 192.168.1.0 route to 10.1.50.2

routes network 2
 linux tunnel 2 -net 10.1.50.0 netmask 255.255.255.0 gw 10.4.0.1
 linksys 10.1.50.0 route to 192.168.1.50

all systems can see each other by ip.  What I would like to do now is
create a bridge so the windows networks can see each other in network
browse.  I only have on ethernet card in each of the tunnel systems. Any
ideas as to how to set up bridging?



____________________________________________
Openvpn-users mailing list
Openvpn-users@xxxxxxxxxxxxxxxxxxxxx
https://lists.sourceforge.net/lists/listinfo/openvpn-users