|
|
Any Help on this please? > Tina, > > 1. what happens to box1 when you start box2? > When i start the openvpn from box1 the it goes to the last statement and > halts and nothing happens > > 2. try to use the IPs 10.0.0.1 and 10.0.0.2 for testing. > I used 192.168.1.101 and 192.168.102 > > > 3. have you tried to do it on a local network? I mean, just take 2 hosts on > the same network to make some tests. > No i dont have local network for Linux its windows and only on machine with > linux. > > These are my conf files on both the boxes > > Box1 > ==== > > Box 1 ( lets say that it has the valid IP 66.xxx.xxx.123 ) > > ======== > > dev tun > > lport 5000 > > verb 3 > > ifconfig 192.168.1.101 192.168.1.102 > > secret /root/certificates/temp.key > > Box2 > ========= > dev tun > port 5000 > verb 3 > remote xx.xxx.xxx.123 > ifconfig 192.168.1.102 192.168.1.101 > secret /root/certificates/temp.key > > This is the last line i get when i start openvp from both the boxes: > > ===> Sat Aug 2 20:30:52 2003 9: /sbin/ifconfig tun0 192.168.1.101 > pointopoint 192.168.1.102 mtu 1256 > > Now what should i do to test if the tunnel is working or not. should i ping > 192.168.1.101/102 from Box1 or Box2? > > See what my idea is : > > I have 5 ips on Box1 which are Static one of the ip is assigned to a domain > let say xxx.xxx.xxx.1 , Now i want to put xxx.xxx.xxx.2 through VPN and make > it load a webpage on the Box2 where i have already configures apache for > doing that. > > I know this is not actally the mailing list is for but even i m trying my > best to get that done. > > Regards, > Tina. > > > > Tácio > > On Friday 01 August 2003 12:27, System wrote: > > Hi Tina, > > > > 1. Vtun is another solution which uses the net tun interface > > 2. If you are little confused try first to set up a tunnel between 2 local > > hosts. > > 3. If not the config below might work for your setup. > > > > Box 1 ( lets say that it has the valid IP 66.xxx.xxx.123 ) > > ======== > > dev tun > > lport 5000 > > verb 3 > > ifconfig 10.0.0.1 10.0.0.2 > > secret /root/certificates/temp.key > > > > > > Box 2 > > ============== > > dev tun > > rport 5000 > > remote 66.xxx.xxx.123 > > verb 3 > > ifconfig 10.0.0.2 10.0.0.1 > > secret /root/certificates/temp.key > > > > Start openvpn in box1, then in box 2. > > Try to ping in the tun ip adresses. > > > > Hope this helps, > > Tácio > > > > Thanks for the Reply. I have made changes as per your configs files and > > here are the scenario please help. > > When I start the openvp from Box1 the Status is : > > > > Box 1 > > =============== > > [root@server certificates]# /usr/local/sbin/openvpn --config openvpn.conf > > Fri Aug 1 21:07:22 2003 0: OpenVPN 1.4.2 i686-pc-linux-gnu [SSL] built on > > Jul 29 2003 > > Fri Aug 1 21:07:22 2003 1: UDP link local (bound): [undef]:5000 > > Fri Aug 1 21:07:22 2003 2: UDP link remote: [undef] > > Fri Aug 1 21:07:22 2003 3: Static Encrypt: Cipher 'BF-CBC' initialized > > with 128 bit key > > Fri Aug 1 21:07:22 2003 4: Static Encrypt: Using 160 bit message digest > > 'SHA1' for HMAC authentication > > Fri Aug 1 21:07:22 2003 5: Static Decrypt: Cipher 'BF-CBC' initialized > > with 128 bit key > > Fri Aug 1 21:07:22 2003 6: Static Decrypt: Using 160 bit message digest > > 'SHA1' for HMAC authentication > > Fri Aug 1 21:07:22 2003 7: Data Channel MTU parms [ udp_mtu=1300 > > extra_frame=44 extra_buffer=0 extra_tun=0 dynamic = [ > > mtu_min_initial=MTU_INITIAL_UNDEF mtu_max_initial=MTU_INITIAL_UNDEF > > mtu_initial=MTU_SET_TO_MAX mtu_min=144 mtu_max=1300 mtu=1300 ]] > > Fri Aug 1 21:07:22 2003 8: TUN/TAP device tun0 opened > > Fri Aug 1 21:07:22 2003 9: /sbin/ifconfig tun0 192.168.1.101 pointopoint > > 192.168.1.102 mtu 1256 > > > > After this i dont get the prompt it just stops here on the both the > > machines. > > > > Box2 > > =========================== > > [root@localhost certificates]# /usr/local/sbin/openvpn --config > > openvpn.conf Fri Aug 1 11:15:21 2003 0: OpenVPN 1.4.2 i686-pc-linux-gnu > > [SSL] built on Aug 1 2003 > > Fri Aug 1 11:15:21 2003 1: UDP link local (bound): [undef]:5000 > > Fri Aug 1 11:15:21 2003 2: UDP link remote: 66.xxx.xxx.123:5000 > > Fri Aug 1 11:15:21 2003 3: Static Encrypt: Cipher 'BF-CBC' initialized > > with 128 bit key > > Fri Aug 1 11:15:21 2003 4: Static Encrypt: Using 160 bit message digest > > 'SHA1' for HMAC authentication > > Fri Aug 1 11:15:21 2003 5: Static Decrypt: Cipher 'BF-CBC' initialized > > with 128 bit key > > Fri Aug 1 11:15:21 2003 6: Static Decrypt: Using 160 bit message digest > > 'SHA1' for HMAC authentication > > Fri Aug 1 11:15:21 2003 7: Data Channel MTU parms [ udp_mtu=1300 > > extra_frame=44 extra_buffer=0 extra_tun=0 dynamic = [ > > mtu_min_initial=MTU_INITIAL_UNDEF mtu_max_initial=MTU_INITIAL_UNDEF > > mtu_initial=MTU_SET_TO_MAX mtu_min=144 mtu_max=1300 mtu=1300 ]] > > Fri Aug 1 11:15:21 2003 8: TUN/TAP device tun0 opened > > Fri Aug 1 11:15:21 2003 9: /sbin/ifconfig tun0 192.168.1.102 pointopoint > > 192.168.1.101 mtu 1256 > > > > Now when i take these both the processse to background and ping from Box1 > > > > [root@server certificates]# ping 192.168.1.102 > > PING 192.168.1.102 (192.168.1.102) from 192.168.1.101 : 56(84) bytes of > > data. > > > > Here it stops!! > > > > I am doing something wrong!! > > > > Regards, > > Tina. > > > > 01 August 2003 07:41, System wrote: > > > > Hello All, > > > > > > > > I am a NewBie to openvpn and Tunnel, But i have know how of > Networking. > > > > > > > > I want to setup a tunnel between two linux boxes. > > > > Scenario: > > > > Box 1 : Redhat 7.3 machine which is a webhosting server with a Static > > > > IP. > > > > > > Box 2 : Redhat 9.0 machine which is on a DSL connection and a Dynamic > > > > Ip. > > > > > > I have compiled openvpn without any compression, I also compiled vTun > > > > and > > > > > > both are on Box1 i haven't done anything on the Redhat 9.0 box. > > > > > > > > Can Anyone please put me on the correct path, Any howto is available. > I > > > > > > have > > > > > > > googled and also went to the openvpn site but that how is out of my > > > > head. > > > > > If > > > > > > > any one can please help me. > > > > > > I have compiled openvpn and vtun on both the Machines Now I have a > > > > question > > > > > please any body anwser this: > > > > > > Box 1 Ip Address : 66.xxx.xxxx.124/127 this is Static pool of IP > > > Box 2 Ip Address : 192.168.1.101 (local) and DSL(24.xxx.xxx.10 this is > > > Dynamic) > > > > > > I have use the SSH Keys for the same and also configured for > Passwordless > > > Authentication. > > > These are my openvpn.conf files > > > Box 1 > > > ======== > > > dev tun > > > port 5000 > > > #comp-lzo > > > #ping 15 > > > verb 3 > > > #shaper 1000 > > > remote 24.xxx.xxx.145 > > > ifconfig 66.xxx.xxx.123 66.xxx.xxx.124 > > > #up /home/openvpn/bin/ip-up.sh > > > #down /home/openvpn/bin/ip-down.sh > > > > > > #Using Pre-Shared Secret Key. > > > secret /root/certificates/temp.key > > > > > > Box 2 > > > ============== > > > dev tun > > > port 5000 > > > #comp-lzo > > > #ping 15 > > > verb 3 > > > #shaper 1000 > > > remote 66.xxx.xxx.123 > > > ifconfig 192.168.1.101 192.168.1.102 > > > #up /home/openvpn/bin/ip-up.sh > > > #down /home/openvpn/bin/ip-down.sh > > > > > > #Using Pre-Shared Secret Key. > > > secret /root/certificates/temp.key > > > > > > The above example is found from Google and from openvpn site. > > > I don;t know what these two file should contain i dont have them and > that > > > is why they are commented. > > > #up /home/openvpn/bin/ip-up.sh > > > #down /home/openvpn/bin/ip-down.sh > > > > > > Now when i start > > > openvpn --config openvpn.conf from both the machines They both goes to > > > the halt stage and nothing happens after. > > > > > > I just want to know what ips should and the seuquence i have a confusion > > > there . > > > Can anybody please correct it the conf file by replacing them to the > > > > Right > > > > > place. > > > > > > Regards, > > > Tina. > > > > > > > > > > > > > > > ------------------------------------------------------- > > > This SF.Net email sponsored by: Free pre-built ASP.NET sites including > > > Data Reports, E-commerce, Portals, and Forums are available now. > > > Download today and enter to win an XBOX or Visual Studio .NET. > > > > > http://aspnet.click-url.com/go/psa00100003ave/direct;at.aspnet_072303_01/01 > > > > > _______________________________________________ > > > Openvpn-users mailing list > > > Openvpn-users@xxxxxxxxxxxxxxxxxxxxx > > > https://lists.sourceforge.net/lists/listinfo/openvpn-users > > > > ------------------------------------------------------- > > This SF.Net email sponsored by: Free pre-built ASP.NET sites including > > Data Reports, E-commerce, Portals, and Forums are available now. > > Download today and enter to win an XBOX or Visual Studio .NET. > > > http://aspnet.click-url.com/go/psa00100003ave/direct;at.aspnet_072303_01/01 > > _______________________________________________ > > Openvpn-users mailing list > > Openvpn-users@xxxxxxxxxxxxxxxxxxxxx > > https://lists.sourceforge.net/lists/listinfo/openvpn-users > > > > > > > > > ------------------------------------------------------- > This SF.Net email sponsored by: Free pre-built ASP.NET sites including > Data Reports, E-commerce, Portals, and Forums are available now. > Download today and enter to win an XBOX or Visual Studio .NET. > http://aspnet.click-url.com/go/psa00100003ave/direct;at.aspnet_072303_01/01 > _______________________________________________ > Openvpn-users mailing list > Openvpn-users@xxxxxxxxxxxxxxxxxxxxx > https://lists.sourceforge.net/lists/listinfo/openvpn-users > > > ____________________________________________ Openvpn-users mailing list Openvpn-users@xxxxxxxxxxxxxxxxxxxxx https://lists.sourceforge.net/lists/listinfo/openvpn-users |